1000 Watt HPS Grow Light Air Cooled Hood Ballast Kit

1,000W High Pressure Sodium Bulb:

• Power: 1,000 watts (High efficiency)
• Expected Life Span: 24,000 hours
• Lumen: 125,000 lumens
• Color Temperature: 2,100K
• Contains more red spectrum, which is best for flowering.
• Non-luring insects
• Strong power to penetrate fog
• High output, high luminescence efficiency.
• Fit for all standard 1,000 watts HPS grow light systems
• Fit for the Heliophile, such as Rose and Camellia, which grows better at longer sunshine time.

1,000W Digital Electronic Ballast:

• High power 1,000 watts
• Built-in cooling fan and heat output holes
• Built-in standard reflector interface
• Fit for 1,000 watts High Pressure Sodium Lamps or 1,000 watts Metal Halide Lamps
• Pass FCC and CE Certificate
• Low Noise
• Energy saving and environmental friendly
• Stabilize input power and output luminous flux
• Reduce wastage and improve usable efficiency of power supply equipment capability
• Shielded component to protect against Radio Frequency Interference to other equipment
• Prevent the electricity from striking the bulb repeatedly and make the bulb nigrescence prematurely
• Protect your eyes when continually working
• Rated Power: 1,000 watts
• Specified Frequency: 50/60Hz
• Working Voltage Range: 120V/240V
• Install Space Requirement: 14-1/2in. x 6in. x 3-3/4in. (37cm x 16cm x 10cm)
• With a 8-1/3ft. power cord to wall (US standard plug)

6" Air Cooled Reflector Hood:

• Air cooling
• Assemble Lighting
• Multi-surface large hood to reflect most light to your plants
• Standard 6" air vent fits to 6" exhaust fan system(NOT included) and fits to any grow tents
• Removable tempered glass locked by switch for temperature control
• Tempered glass assemble with exhaust fan(NOT included) can deflate heat for plants not need much heat
• Tempered glass removed without exhaust system can offer more heat for tropical plants
• Dimensions: 26in.(L) x 22-1/4in.(W) x 10in.(H)

Ceramic Socket:

• Fit for E39 bulb cap
• Detachable durable ceramic socket
• Easy to install if you need to change your reflector
• Ceramic socket should be used with ballast for steady power supply.
• With a 14-3/8ft. power cord

Timer: (Free Gift)

• Safe and easy to use
• Ensure timer is disconnected from power supply.
• Press down the segment pushbuttons according to how long you require the system to stay on.
• Each segment is 15 minutes.
• Turn the timer dial until the black pointer is set to the present time.
• Plug in your grow light system to the timer and then the timer to the power supply socket and switch the socket on.
• Timer and your light system go working till the stop time.
• The timer can be overridden by moving the red switch on the side.
• Timer Power: Max Wattage 1725W; Max Current 15A/120V/60Hz

Package Includes:

• 1x 1,000W High Pressure Sodium Bulb
• 1x 1,000W Digital Electronic Ballast
• 1x 6" Air Cooled Reflector Hood
• 1x Ceramic Socket
• 1Set Hi-Low Yoyo Reflector Hanging kit
• 1x Free Timer