12V 9AH Battery

12 Volt 9 Amp Battery with acid installed. Fits full-size scooters, mopeds, ATVs, dirt bikes, motorcycles, off-road vehicles and much more.

• 12 Volt 9 AH
• Length: 5.28 inches
• Width: 2.95 inches
• Height: 5.47 inches

Set-Up Instructions 1. Remove the packing and remove the tin foil strip from the top of the battery. Remove the battery acid pack from the plastic bag but do not remove the foil from the top of the acid pack. 2. Invert the acid pack into the top of the battery so that the foil covered top of the acid pack is covering the holes in the top of the battery. Press the acid pack down firmly into the holes in the battery (a series of spikes inside the battery holes will pierce the foil and let the acid out). Gently tap the acid pack until all the acid has gone into the battery. Use all of the acid that comes with the battery as this provides the required amount to fill the battery. 3. Charge the battery for 5-6 hours with a Battery Charger. 4. Let the battery set for 1 hour. 5. Place the plastic strip into the holes on the top of the battery and press firmly (do not hit) into place until the plastic strip fits flush with the top of the battery. 6. Disconnect the battery from the battery charger. 7. The battery is now filled, charged and ready for use (when connecting to a motorbike/scooter, always connect the positive (+) terminal first).