600 Watt MH HPS Grow Light Electronic Ballast Umbrella Reflector

This latest 600W Metal Halide(MH) and High Pressure Sodium(HPS) Grow Light System benefits: vigorous growth, accelerate development, and hearty flowering! MH light is for better vegetation, meanwhile, HPS light is for better flowering. Both lights are best for your plants chlorophyll production. The balanced spectrum light absorbed well by chlorophyll can make your plants thickset and flourish more. It is especially productive for spring vegetable and flower seedling development. Coming with the Free Timer to help you to control the lighting time conveniently, especially when you are not in your garden. Safe and environmental friendly.
600W High Pressure Sodium Bulb:
Power: 600 watts (High efficiency)
Built-in heat output holes
Expected Life Span: 24,000 hours
Lumen: 90,000 lumens
Color Temperature: 2,100K
Contains more red spectrum, which is best for flowering.
Non-luring insects
Strong power to penetrate fog
High output, high luminescence efficiency.
Fit for all standard 600 watts HPS grow light systems
Fit for the Heliophile, such as Rose and Camellia, which grows better at longer sunshine time.

600W Metal Halide Bulb:
Power: 600W (High efficiency)
Expected Life Span: 10,000 hours
Lumen: 60,000 lumens
Color Temperature: 4,200K
Contains blue spectrum, which is best for vegetation.
Non-luring insects
Strong power to penetrate fog
High output, high luminescence efficiency.
Fit for all standard 600 watts MH grow light systems
Special good efficiency for leafy plants such as Lettuce and Herb
Fit for the Heliophile, such as Rose and Camellia, which grows better at longer sunshine time.

600W Digital Electronic Ballast:
High power 600 watts
Built-in standard reflector interface
Fit for 600 watts High Pressure Sodium Lamps or 600 watts Metal Halide Lamps
Pass FCC and CE Certificate
Low Noise
Energy saving and environmental friendly
Stabilize input power and output luminous flux
Reduce wastage and improve usable efficiency of power supply equipment capability
Shielded component to protect against Radio Frequency Interference to other equipment
Prevent the electricity from striking the bulb repeatedly and make the bulb nigrescence prematurely
Protect your eyes when continually working
Rated Power: 600 watts
Specified Frequency: 50/60Hz
Working Voltage Range: 120V/240V
Install Space Requirement: 12in. x 6-1/4in. x 4in. (31cm x 16cm x 16cm)
With a 8-1/3ft. power cord to wall (US standard plug)

3.5ft x 3.5ft Vertical & Horizontal Reflector:
Built-in two louvers for air cooling
Both of vertical and horizontal lighting assemble
Built-in silver reflector for horizontal lighting
Multi-surface large hood to reflect most light to your plants
3.5ft x 3.5ft large size reflector for wide coverage area from low hanging height
Fit for any grow tents
You could up-grade your light system up to 1,000 watts just by replacing the bulb and the matchable ballast.
Top Dimensions: 16in. x 16in.
Install Space Requirement: 41-1/2in. x 41-1/2in.(Base) x 10in.(H)
Reflector Dimensions: 7-3/4in.(L) x 3-1/4in.(W)
Installation required (Please refer to the instruction.)

Please kindly notice that this item only includes one reflector. Reflectors with HPS and MH bulbs shown in picture are demonstration only.
Ceramic Socket:
Fit for E39 bulb cap
Detachable durable ceramic socket
Easy to install if you need to change your reflector
Ceramic socket should be used with ballast for steady power supply.
With a 14-3/8ft. power cord

Timer: (Free Gift)

Safe and easy to use
Ensure timer is disconnected from power supply.
Press down the segment pushbuttons according to how long you require the system to stay on.
Each segment is 15 minutes.
Turn the timer dial until the black pointer is set to the present time.
Plug in your grow light system to the timer and then the timer to the power supply socket and switch the socket on.
Timer and your light system go working till the stop time.
The timer can be overridden by moving the red switch on the side.
Timer Power: Max Wattage 1725W; Max Current 15A/120V/60Hz

Package Includes:
1x 600W Metal Halide Bulb
1x 600W High Pressure Sodium Bulb
1x 600W Digital Electronic Ballast
1x 3.5ft x 3.5ft Vertical & Horizontal Reflector
1x Ceramic Socket
1Set Hi-Low Yoyo Reflector Hanging kit
1x Free Timer

Parameter Reference Range for Growing:

Stage

Light

Lighting Time

Dark Time

Hanging Height

Best Temperature

First 2-4wks (Recovery Stage)

MH

18hrs

6hrs

Infinity to 18in.

72-76 degree Fahrenheit

Last 8-9wks

HPS

12hrs

12hrs

18in.

72-76 degree Fahrenheit

These parameter reference range is for general plants, such as tomato. Please set up your grow tent system depending on your specific plant. Thank you!
Welcome to visit Our Store for complete Hydroponics MH Growing System!