ARRMA AR102031 Raider Red RTR 2.4GHz

ARRMA AR102031 Raider Red RTR 2.4GHz

This is the electric powered, 2.4GHz radio controlled 1/10 scale, ready to run Raider Baja Buggy with Red Body from Arrma.

Features

• ARRMA AR102031 Raider Red RTR 2.4GHz

• Chassis: Aluminum 0.08" (2mm) thick matural finish with double chassis rails and alloy front chassis plate, batteries fit under chassis-no need to remove body to change batteries

• Drive: Rear wheel with steel driveshafts and axles

• Motor: 15 turn brushed

• Radio: ATX300 2.4GHz 3-channel with lightweight ARX300 receiver, transmitter can be converted for left or right hand use, seven position adjustable steering wheel, six model memory, digital trim, servo reverse, end-point adjustment and failsafe

• Electronic Speed Control: Waterproof MEGA ESC with LiPo cutoff

• Receiver Box: Splash and dust proof

• Body: Trimmed and painted "Warp" polycarbonate Baja buggy with black plastic rear wing

• Transmission: Metal gear, brushless ready

• Slipper Clutch: Machined alloy gears, adjustable for different track conditions

• Differential: Metal planetary gear, oil filled

• Suspension: Fully independent

• Shocks: Composite body, oil-filled

• Tires: dBoots Dunerunner with dBoots foam inserts

• Front, 1.2" (30mm) wide, 3.3" (85mm) diameter

• Rear, 1.6" (40.5mm) wide, 3.3" (85mm) diameter

• Wheels: Six spoke chrome, 12mm hex

• Front, 1.1" (29mm) wide, 2.2" (56mm) diameter

• Rear, 1.6" (41mm) wide, 2.2" (56mm) diameter

• Caster: Adjustable caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis

• Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle

• Steering: Bellcrank type with composite servo saver

• Warranty: Two year

Specifications

•   Vehicle-

• Length: 15.7" (400mm)

• Width: 9.9" (252mm)

• Height: 5.5" (140mm)

• Wheelbase: 11.4" (290mm)

• Ride Height: 1.2" (30mm)

• Weight: 3lbs (1360g) without battery

•   Body-

• Length: 10.1" (257mm)

• Width: 4.5" (114mm) at widest point

• Height: 3" (76.2mm)

Contents

• RTR Raider Baja Buggy with Red Body and 2.4GHz Radio, ESC, Steering Servo, 15T Motor, Tires, Wheels, Foam Inserts, Decals and Instruction Manual

Requirements

• AA Batteries: Four for transmitter

• Battery: 7.2V 6-cell stick NiMH or NiCd, or 7.4volt 2S LiPo (if using LiPo batteries, LiPo mode must be set on ESC)

• Battery Charger: To match selected battery

• Building and track equipment

Comments

• For replacement or to upgrade to ball bearings use:

•   Qty. Size               Location              Qty. Bearing Set

•     4    5x10mm         Fr Wheels           2      DTXC1535

•     4    5x13mm         Rear Wheels       2      ARAC3201

•     2    10x15mm       Diff Gear             1      DTXC1595

•     4    5x10mm         Gearbox             2       DTXC1535