Associated LRP Z.28R Spec 3 w/Pull Start LRP32802

Associated LRP Z.28R Spec 3 w/Pull Start LRP32802

This is the Associated LRP Z.28R Spec 3 Engine with Pull-Starter. For use with 1/8 scale off-road buggies and monster trucks such as the Associated MGT, ASCC0389.

Features

• Associated LRP Z.28R Spec 3 w/Pull Start LRP32802

• Slide Valve Carburetor, 8.5mm venturi with ball link on throttle

• ABC piston and sleeve construction, (Aluminum piston with a Brass sleeve that is Chrome plated)

• SG (pilot) type crankshaft, 13mm from tip to threaded area

• Fork shaped aluminum connecting rod with double bushings

• Black anodized crankcase with Blue anodized 10-fin cooling head

• Rear exhaust

• Ninety day limited warranty

Specifications

• Power Output: 3.81 PS depending on fuel type, manifold and tubing

• Useable RPM Range: 2,000-33,0000

• Engine Size: .28 cu in (4.58cc)

• Bore: .73" (18.5mm)

• Stroke: .63" (17mm)

• Number of Ports: 6+1 (6 intake, 1 exhaust)

• Weight: 15.9 oz (450g)

• Distance Between Mounting Holes Same Side: .83" (21.2mm)

• Distance Between Mounting Holes Opposite Side: 1.45" (37mm)

• Height from Bottom of Crankcase/Top of Cylinder Head: 4.5" (115mm)

• Height from Bottom Mounting Ears/Top of Cylinder Head: 3.7" (93.5mm)

• Width at Mounting Ears: 1.7" (43.5mm)

• Length from Back of Pull Starter to End of Crankshaft: 4.5" (115mm)

• Length from Center of Crankcase to End of Crankshaft: 3" (76mm)

Contents

• Associated LRP Z.28R Spec 3 Engine with Pull-Starter, glow plug, tapered collet, Slide Valve Carburetor, instruction sheet

Requirements

• Fuel: 25% nitromethane car blend, do not exceed 30% nitro content

• Air Filter: Foam type with 14mm-15mm base to fit carburetor

• Exhaust System: Size and type depends upon vehicle

• Associated makes an adapter (ASCG3340) allowing the HPI Roto Start (HPIP7126) to be used on this engine.