
DLE Engine DLE-222cc 4-Cyl Gas Engine w/EI/Mount
ITEM# DLE-222
Guarantee Safe Checkout
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Description
DLE Engine DLE-222cc 4-Cyl Gas Engine w/EI/Mount
This is the DLE 222cc Gasoline Powered Engine with Electronic Ignition.
Features
-
DLE Engine DLE-222cc 4-Cyl Gas Engine w/EI/Mount
-
Dual carburetors for maximimum performance
-
Double V-type reed valve bottom induction
-
Six bolt prop hub
-
Fully automatic electronic ignition
-
Two year limited warranty through Hobby Services beginning at date of purchase
Specifications
-
Engine;
-
Output Power: 21.5 HP at 7,500 RPM
-
RPM Range: 1,000 - 7,500
-
Idle Speed: 1000 RPM
-
Displacement: 13.6 cu in (222.5cc)
-
Bore: 1.77" (45mm)
-
Stroke: 1.38" (35mm)
-
Compression Ratio: 7.6:1
-
Engine Weight: 10.9lbs (174.6oz) (4950g)
-
Total Width Including Both Cylinder Heads: 10.1" (258mm) not including spark plugs
-
Distance between Horizontal Mounting Hole Centers: 3.2" (81mm)
-
Distance between Vertical Mounting Hole Centers: 3.6" (91mm)
-
Height of Entire Mounting Plate: 4.2" (107mm)
-
Widtht of Entire Mounting Plate: 3.8" (96mm)
-
Length from Mounting Plate to Front Bearing: 8.97" (228mm)
-
Length from Mounting Plate to Prop Hub: 10.1" (258mm)
-
Height from Crankcase to top of Carburetors: 6.2" (157mm)
-
Distance between Muffler Mounting Hole Centers: 1.6" (40.5mm)
-
Height from Crankcase to end of Muffler Pipe Outlet: 11.2" (286mm)
-
Muffler Outlet Diameter: 1.2" (30mm)
-
Cylinder Head Exhaust Outlet Height: 0.51" (13mm)
-
Cylinder Head Exhaust Outlet Width: 1.1" (27mm)
-
Muffler Can Length: 8.4" (214mm)
-
Muffler Can Diameter: 2" (50mm)
-
Exhaust Pipe Diameter: 1.2" (31mm)
-
Exhaust Pipe Length: 6" (152mm)
-
Gasoline/Oil Mixture: 30:1
-
Gasoline Octane Rating: 87-93
-
Recommended Propellers: 26x12, 28x10
-
Spark Plugs: NGK CM6 (DLEG5510) or equivalent
-
Carburetor;
-
Carburetor is preset from the factory but may require slight needle adjustment depending on altitude
-
Low Speed Needle: 1.5 turns from closed
-
High Speed Needle: 1.5 turns from closed
Contents
-
Engine, four spark plugs, standoffs, ignition, instruction manual two mufflers, prop hub and throttle arm extension
Requirements
-
87 octane gasoline
-
2-cycle oil, mix ratio for this engine is 30 parts gas to one part oil and must be followed exactly for warranty consideration and optimum performance
-
Ignition Battery: Two 4.8 - 6V NiCd or NiMH batteries OR 7.4V LiPo Packs (LiPo use requires voltage regulator) (separate receiver style pack can be used)
-
Propeller: 32x10, 32x12, 34x10
-
Field Equipment
Comments
-
To avoid permanent damage to the electronic ignition system, NEVER turn your DLE engine over with the system switched on and the plug not installed.