FlightPower EON Rx LiPo 2S 7.4V 1600mAh

FlightPower EON Rx LiPo 2S 7.4V 1600mAh

This is the FlightPower EON-X RX 1600 2S 7.4V LiPo Receiver Battery Pack with Balance Connector from FlightPower.

Features

• FlightPower EON Rx LiPo 2S 7.4V 1600mAh

• Provides unequalled voltage stability and lighter weight than stock receiver batteries

• Ideal for the latest high torque, high speed servos that require more current

• Pre-fitted with two universal radio connectors, one for plugging into a regulator and one for charging at rates of up to 2.5C with an approved balancer such as the Great Planes ElectriFly Equinox LiPo Balancer

Specifications

• Size: 2.7 x 1.6 x 0.55" (69 x 41.5 x 14mm)

• Weight: 3.0oz (85g)

• Capacity: 1600mAh

• Continuous Discharge Current:

• Continuous Discharge Amps:

• Rated Voltage: 7.4V

• Number of Cells in Series: 2

• Max. Charge Voltage: 4.25V per cell

• Min. Discharge Voltage: 3.0V per cell

• Maximum Recommended Charge Current: 2.5C

Package Contents

• FlightPower EON-X RX 1600 2S 7.4V LiPo Receiver Battery Pack, two universal radio connectors, balance connector and instruction sheet

Requirements

• ElectriFly Equinox LiPo Balancer, GPMM3160 and 2S Adapter (GPMM3180) if using this balancer

• Charger - TRITON2 (GPMM3153)

Comments

• ALWAYS use a LiPo-approved charger. DO NOT use wall charger supplied with radio

• ALWAYS use a LiPo Cell Balancer

• ALWAYS read enclosed instruction sheet

• NEVER Charge over 4.25V per cell

• NEVER Charge at currents greater than 2.5C with balancer

• NEVER Charge through the "To ESC or "DISCHARGE" lead

• NEVER Trickle Charge

• NEVER charge dissimilar or unmatched packs in series or with any difference in cell type, cell capacity, pack capacity or charge state (�0.03V per cell) if in doubt, charge separately

• NEVER allow to Discharge below 3.0V per cell

• Never expose pack to intense heat or prolonged exposure to elevated temperature

• NEVER continue charging if any part of pack gets warm (LiPo packs should not heat up during charging)

• NEVER charge a pack at sub-zero temperatures

• NEVER disassemble or modify pack wiring in any way or puncture cells

• NEVER place on combustible materials or leave unattended during Charging

• NEVER charge a pack that is under voltage after recovery (under 3.0V per series cell)

• ALWAYS Charge in a fireproof location

• ALWAYS set charger's output volts to match battery volts

• ALWAYS keep out of reach of children