Futaba 4PKS 4CH 2.4GHZ FASST R614FF RX FUTK4901

Futaba 4PKS 4CH 2.4GHZ FASST R614FF RX FUTK4901

This is the Futaba 4PK Pistol Grip Transmitter and the R614FF Receiver with the 2.4GHz FASST system for surface use. Servos are not included.

Features

• Futaba 4PKS 4-Channel 2.4GHz FASST/R614FF Rx

• Futaba's FASST (Futaba Advanced Spread Spectrum Technology) shifts very quickly virtually eliminating signal conflicts and
  interruptions unlike other 2.4GHz systems that only stay on one or two frequencies

• New features are the 4-wheel steering mixing for better rock crawling capabilities, plus new Updating program

• Dual antenna diversity enables FASST system to automatically and seamlessly select the best reception between the two antenna built into the receiver ensuring that model stays under constant control of transmitter regardless of altitude

• Pre-Vision Packet Screening technology scans incoming data for potential problems and applies sophisticated error correction techniques for solid impenetrable link with model

• Easy Link system features a unique ID code in the transmitter that links to the receiver insuring that receiver only follows commands from this transmitter-with over 134 million possible codes there is no chance for a conflict "New Driver" "Race Ready" "Expert" and "Big Car" menus that add functions based on skill level and experience

• Throttle Mode Select for selecting acceleration/brake servo neutral points between 70/30 for nitro or 50/50 for electrics, throttle programming options including 5-point curve, expo and VTR

• Slide the power switch to "display" to set up without transmitting- use one of the four menus provided or create a custom menu, optimize response for analog or digital/brushless servos, set up two sets of dual rates, choose two Condition Select functions, restore factory settings with the adjuster function, or adapt electronic speed control to HRS frame rates with MC link

• Traction control/acceleration rate

• Custom menu assignments

• Data transfer

• ABS braking

• Boat mixing-in addition to great performance in R/C car and truck applications, this system is also ideally suited to the rigors of boat racing

• Direct Select single button access to eight reassigned functions

• Forty model memory with ten character model naming

• Fourth channel for 4WS crawlers, transponders, brake bias and more VTR, acceleration, speed, expo, mode, tension and 5-point curve (throttle)

• Two programmable mixes

• Electronic and mechanical ATL (brake side only)

• Condition select 2

• Programmable battery fail safe

• Start function/engine cut

• Right/Left hand use

• Channel 1-4 fail safes

• Assignable buttons and dials

• Digital trims memory and reset

• Navigation lap timer that sounds when target lap time is exceeded, up, down lap and systems timers

• One year limited warranty through manufacturer beginning at date of purchase

Specifications

• Transmitter

• Power Requirement: NT5F1700B NiMH 6V battery (included) OR 4 AA batteries

• Current Drain: 250mA or less (vibration and back lighting off)

• Battery Charger

• Input: 120V AC, 60Hz 5W

• Output: TX 6 VDC 170mA

• X 6 VDC 100mA

• Receiver

• Size: 1.38 x 0.91 x 0.33" (35.1 x 23.2 x 8.5mm)

• Weight: 0.28oz (7.8g)

• Operating Voltage: 3.5 - 8.4V

• Current Drain: 135mA or less

Package Contents

• 4PK Pistol Grip Transmitter

• R614FF Receiver

• HT5F1700B 1700mAh 6V Transmitter Battery

• HBC-3B(4) 120V AC Battery Charger (FUTM1832)

• Switch Harness

• Wheel Adapter

• Small Screwdriver

• Manual

Requirements

• Servos of modeler's choice (digital servos can be used in Normal or High Speed Mode, analog servos must be used in Normal Mode)

Comments

• The 4PK is also compatible with the R603FS, R603FF and R604FS receivers.