Futaba R148DP 8-Channel PCM 72MHz High w/o Crystal FUTL0823

Futaba R148DP 8-Channel PCM 72MHz High w/o Crystal FUTL0823

This is a R148DP 8-Ch 72MHz PCM 1024 Dual Conversion Micro Receiver Without Crystal. This is a High Band (channel 36-60) receiver without a crystal (see REQUIRES).

Features

• Futaba R148DP 8-Channel PCM 72MHz High w/o Crystal FUTL0823

• Narrow-band spacing and Dual Conversion signal filtering combine to provide exceptionally clear, interference-free reception and amazingly smooth, accurate control.

Specifications

• Narrow Band: 20KHz

• Intermediate Frequency- 1st IF: 10.7MHz

• 2nd IF: 455kHz

• Power Requirements: 4.8 to 6.0V (shared with servos)

• Current Drain: 14mA

• Length: 2.19" (55.5mm)

• Width: 1.00" (25.5mm)

• Height: 0.89" (22.5mm)

• Weight: 1.07oz (30.4g)

Package Contents

• One R148DP Micro 8 Channel 72MHz PCM 1024 Receiver

Requirements

• One FUTL58** Dual Conversion Receiver Crystal

Comments

• 1024 Resolution is NOT Compatible with Older PCM 512 Systems.

• For the transmitter/receiver crystal set, use FUTL20**.

• For the High Band, use FUTL0823.

• Special Notice about Frequency Changes-

• *72MHz- Low band channels 11 to 35; High band channels 36 to 60. Receiver crystal channels (11-35 or 36-60) Within Each Band Can Be Changed, and Do Not Require a retuning of the receiver.

• *72MHz Frequency Band (Low or High) for the receiver Can Not Be Changed from Low to High band, OR from High to Low band without sending it into Futaba Services for retuning.

• *50MHz, 72MHz, 27MHz and 75MHz Frequency Bands Can Not under any circumstances be interchanged with each other. 72/75:receiver Must be sent in for retuning to the appropriate band. 50/27: can't do.

• *50MHz, 27MHz and 75MHz receiver crystals Can be changed anywhere within the respective bands. There are no High or Low bands such as the 72MHz band has.

• *Transmitter Crystals Can Not be changed to another channel except by a licensed service center. It is against FCC regulations, and illegal for the user to change a frequency determining component of a transmitter. If the radio is not retuned, it can be a hazard spectators, modelers or property, and void AMA insurance coverage.

• *Check with the local R/C club for the frequencies used in your area.