Great Planes 1.60-50cc Reactor ARF GPMA1420

Great Planes 1.60-50cc Reactor ARF GPMA1420

This is the Radio Controlled, Glow, Gasoline, or Electric Powered Almost-Ready-to-Fly Great Planes Performance Series Reactor 1.60 Scale Airplane IMAA Legal, this model is ideal for a flyer's first giant scale aerobatic and 3D airplane.

Features

• Great Planes 1.60-50cc Reactor ARF GPMA1420

• Construction: Laser cut balsa and plywood with a foam sheeted turtle deck

• Wings: Two-piece, bolt-on with aluminum joiner tube

• Covering: TopFlite MonoKote

• Landing Gear: Pre bent aluminum 0.16" (4mm) thick

• Wheels: Main, 3.5" (88mm) diameter foam, tailwheel, 1" (25.4mm) rubber

• Radio Compartment: Hatch removes easily with four bolts

• Spinner: Aluminum 3.25" (82.5mm) diameter

• Cowling: Painted fiberglass

• Wheel Pants: Painted fiberglass

• Canopy: Clear molded plastic

• Aileron Control: Dual servo

• Elevator Control: Dual servo

• Fuel Tank: Approximately 24oz (720cc) for glow fuel, must purchase gasoline conversion kit and tubing if using gasoline engine

• Engine Mount: Two piece composite construction

• Hardware: Full set provided, IMAA legal

• Assembly Time: Only 15-20 hours

• Warranty Period: Great Planes guarantees this kit free from defects in both material and workmanship at the date of purchase.

Specifications

• Wingspan: 84.5" (2140mm)

• Wing Area: 1556 sq in (100.4 sq dm)

• Weight: 14 - 17 lb (6.35 -7.71 kg) depending on power setup selected

• Length: 85" (2160mm)

• Airfoil: Fully symmetrical

• Center of Gravity: 7" (178mm) from the leading edge of the root wing rib

• Control Throws: Low High 3D

• Elevator: 1" (25mm) 10� 1-1/2" (38mm) 15� 3-1/4" (83mm) 34�

• Rudder: 2-3/4" (70mm) 16� 4-3/4" (121mm) 28� 5-3/4" (146mm) 35�

• Ailerons: 1-1/2" (38mm) 11� 2-1/2" (64mm) 19� 4-1/2" (114mm) 36�

Contents

• Pre-built and covered wings, fuselage and tail assemblies, pushrods, landing gear, wheels, wheel pants, cowl, fuel tank, wood servo trays, aluminum spinner two decal sheets, hardware package, photo- illustrated instructions

Requirements

• Engine: 1.60 - 2.10 cu in (26 - 34cc) two-stroke OR 2.00 - 2.20 cu in (33 - 36cc) four-stroke OR 2.5 - 3.0 cu in (43 - 50cc) gasoline (Desert Aircraft DA-50 gas engine recommended, not carried) OR 80-75-230 Outrunner Brushless Motor
  Radio: 5-6 channel, 6-channel computer radio recommended

• Servos: Eight, 7 high-torque, 1 standard ball bearing

• 6" (152mm) Heavy Duty Servo Extensions: Two/inboard aileron control

• 24" (610mm) Heavy Duty Servo Extensions: Two/outboard aileron control

• 36" (914mm) Heavy Duty Servo Extensions: Three for tail servos

• 1.5" (38mm) Large Scale Single Side Servo Arms: Seven

• Y-Harness: Two heavy duty

• Receiver Battery: 4.8 or 6V at least 4200mAh

• Heavy duty switch harness and charge jack

• #4 Plastic Washers: For cowl

• Misc. Items: Building and field equipment

Comments

• The 38% Extra 330S Pilot Bust (GPMA3207) also fits nicely under the canopy of this aircraft.

• Following is a list of MonoKote colors used to cover this model and order numbers for 6ft rolls; White TOPQ0204 Sapphire Blue TOPQ0226 Orange TOPQ0202 Missile Red TOPQ0201