Great Planes Extra 300SP .46-.81 Scale Aerobatic 3D EP/GP ARF GPMA1022

Great Planes Extra 300SP .46-.81 Scale Aerobatic 3D EP/GP ARF GPMA1022

This is the radio controlled, electric or glow powered, almost ready to fly Great Planes Extra 300SP Sport Airplane.

Features

• Great Planes Extra 300SP .46-.81 Scale Aerobatic 3D EP/GP ARF GPMA1022

• Construction: Balsa and ply

• Wings: Two-piece with aluminum joiner tube

• Radio Compartment: Plywood reinforced, accessible under canopy

• Canopy: Single, clear plastic (pilot figure shown in photos not included)

• Aileron Control: Dual servo

• Covering : Top Flite MonoKote

• Cowl: Painted fiberglass

• Landing Gear: Painted aluminum 0.12" (3.2mm) thick

• Wheels: Foam, main 2.25" (57mm) diameter, 1" (25.4mm) diameter tailwheel

• Wheel Pants: Painted fiberglass

• Fuel Tank: 10.8oz (320cc)

• Spinner: White plastic 2.5" (63mm) diameter

• Building Time: Ready to fly in 20-25 hours

• Warranty: Great Planes Model Manufacturing Company guarantees this kit free from defects in both materials and workmanship at the date of purchase.

Specifications

• Wingspan: 55" (1395mm)

• Wing Area: 590 sq in (38.1 sq dm)

• Weight: 5.5 - 6.5lbs (2495 - 2950g)

• Wing Loading: 21 -25 oz/sq ft (65 - 77 g/sq dm)

• Length: 53" (1345mm)

• Airfoil: Semi symmetrical

• Center of Gravity: 3-3/4" (95mm) from leading edges of wing at the fuselage

• Control Throws: Low Rate High Rate 3D

• Elevator: 3/8" (9.5mm) 6� 3/4" (19mm) 11� 3" (76mm) 51�

• Rudder: 2" (51mm) 16� 2-3/4" (70mm) 22� 5" (127mm) 44�

• Ailerons: 3/8" (9.5mm) 6� 3/4" (19mm) 14� 1-3/8" (34.5mm) 26�

Contents

• Great Planes Extra 300SP ARF Sport Airplane with wheels, spinner, 2-pc engine mount, two decal sheets, fuel tank, pushrods, all hardware and instruction manual

Requirements

• Radio: 4-5 channel, 4-5 servos

• Servos: Three standard ball bearing (1-elevator, 2-ailerons)

• One high torque ball bearing (1-rudder)

• One micro servo (1-throttle)

• *this is the setup for sport flying, micro servos can also be used for rudder, elevator and aileron control

• Servo Extensions: One 8" (203mm)for throttle or ESC

• One 12" (305mm) for rudder servo if installing in rearward mounting position

• Engine: .46-.55 cu in (7.5-9cc) 2-stroke OR .52-.81 (8.5-13cc) 4- stroke OR Electric Motor: RimFire .80 (50-55-500kV) with Silver Series 60A ESCmotor mount, ESC programming card and 15x7E propeller, hook and loop adhesive strips, LiPo battery and charger

Comments

• Following are the Top Flite MonoKote colors used to cover this model and order numbers for 6ft rolls;

• Yellow TOPQ0203 Jet White TOPQ0204 Metallic Blue TOPQ0402 Metallic Platinum TOPQ0408