Heli-Max LiPo 1S AC Battery Charger Axe CX Nano HMXP2020
ITEM# HMXP2020
Guarantee Safe Checkout
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Description
Heli-Max LiPo 1S AC Battery Charger Axe CX Nano HMXP2020
This is the AC Powered 1S Lipo Charger for use with the Axe CX Nano 1S LiPo 350mAh Battery (GPMP0412).
Features
-
Heli-Max LiPo 1S AC Battery Charger Axe CX Nano HMXP2020
-
Green LED on Wall Transformer indicates power on
-
Fast Flashing Red: The battery is being charged
-
Green (Solid or Flashing): The battery is fully charged
-
Slow Flashing Red: A time-out has occurred
-
Solid Red (with battery connected): The battery voltage is too low or the charger is not powered
-
Solid Red (without battery connected): The charger is ready
Specifications
-
Input: AC100-240V
-
Output: DC4.2V 500mAh
Contents
-
One 1S Lipo Charger
Requirements
-
Use with the Axe CX Nano 1S LiPo 350mAh Battery
Comments
-
Only use this charger with the 3.7V LiPo Batteries for the Axe CX Nano.
-
Do not attempt to use this charger with NiCd or NiMH battery packs.
-
Never charge in excess of 4.20V per cell.
-
If the battery should become damaged, discard the battery. Do not attempt to use a damaged battery.
-
Do not leave the charger unattended while charging. Disconnect the battery and remove input power from the charger immediately if either becomes hot! However, it is normal for the charger to get warm.
-
Disconnect the battery from the charger and carefully move the battery to a fireproof location if the battery begins to swell or smoke!
-
Never charge at currents greater than 1C.
-
Always charge in a fireproof location.
-
Never trickle charge.
-
Never allow the battery temperature to exceed 150� F (65� C).
-
Never disassemble or modify pack wiring in any way or puncture cells.
-
Never discharge below 2.75V per cell.
-
Do not allow water, moisture or foreign objects into the charger.
-
Do not block the air intake holes, which could cause the charger to overheat.
-
Do not place the charger or any battery on a flammable surface or near a combustible material while in use.
-
Do not charge on a carpet, cluttered workbench, paper, plastic, vinyl, leather, wood or inside an R/C model.
-
Never charge inside a full-sized vehicle.
-
Always disconnect the battery from the charger and the power supply from the charger when not in use.
-
Do not attempt to charge a battery if it is swollen or hot.
-
ALWAYS KEEP OUT OF REACH OF CHILDREN.