Hobbico Hot-Shot 2 Super Sanyo 1500mah NiCd HCAP2528

This is a Super Hot-Shot #2 Standard Glo-Starter with Battery Charger. This is used to heat glow plugs to start glow-powered engines.

Features

• Hobbico Hot-Shot 2 Super Sanyo 1500mah NiCd HCAP2528

• Proven Twist and Lock Connector ensures a secure, solid connection that won't come off, providing safer, faster starts for your model.

• Pre-Installed Genuine Sanyo Sub-C battery cell

• Included AC battery charger with hex-shaped charge end recharges the glow starter in 10 hours. A Red LED glows when unit is Charging.

• Removable Red rubber socket cap prevents shorting and any dirt or dust debris from entering into the the shaft.

• One Year Limited Warranty USA and Canada only

Specifications

• Sanyo Sub-C NiCd Battery: 1500mAh, 1.2V

• AC Charger- Input: 110-120V AC 60Hz (US Standard) Output: 1.25V DC 150mA

•  Hot Shot- Overall Length: 4-5/8" (118mm) Shaft Length: 2-1/4" (57mm)

• Diameter: 1-5/16" (33mm)

Package Contents

• One Super Hot Shot 2 Standard Glo-Starter w/Red rubber protective cap

• One Hot Shot #2 Glo-Starter Battery Charger

• One Instruction/Header Card

Comments

• How to use: To lock onto your engine's glow plug, place the end of the Hot Shot 2 over the plug and push down. Twist the Super Hot Shot #2 clockwise to lock into place.

• Charging: Before using, initial Charge should be 12 to 14 hours

• Subsequent charging time is approximately 10 hours

• For Hot Shot #2 Standard version use HCAP2520

• For Hot Shot #2 Long version use HCAP2522

• Note:*** The charger originally packaged with this Glo-Starter has a 150mAh Charge rate which requires a long time to Charge the large mAh battery. The modeler Charges the battery initially for 24 hours. After that, 12-hour Charges each. If modeler is a regular flier, Charge twice a month for 24 hours. ***