HPI Nitro Star G3.0 Engine w/Pull Start 15105

HPI Nitro Star G3.0 Engine w/Pull Start 15105

This is the HPI Nitro Star G3.0 Engine with Pull Starter used in the HPI Fire Storm - HPIC0510.

Features

• HPI Nitro Star G3.0 Engine w/Pull Start 15105

• Composite body rotary valve carburetor with 5.5mm bore

• Silver colored cooling head

• SG (pilot) type crankshaft

• Two year limited warranty

Specifications

• Specs such as horsepower, bore, stroke and RPM were not provided-contact HPI for further information

• High Speed Needle Setting: Turn clockwise in 1/8 turn increments to lean fuel mixture. Do not exceed 2-1/2 turns from flush

• Idle Adjustment: Adjust for about 0.04" (1mm) gap between slide valve and carb body at bore opening

• Low Speed Needle: No adjustment recommended

• Displacement: .18 cu in (3.0cc)

• Distance Between Mounting Holes Same Side: 0.43" (11mm)

• Distance Between Mounting Holes Opposite Side: 1.22" (31mm)

• Height/Bottom Mounting Flanges to Top of Cylinder Head: 2.99" (76mm)

• Height/Bottom of Crankcase to Top of Cylinder Head: 3.5" (89mm)

• Length from Pull Starter to End of Crankshaft: 4.13" (105mm)

• Length from Pull Starter to Front Bearing: 3.3" (75.3mm)

• Length from Center of Crankcase to End of Crankshaft: 2.96" (75mm)

• Diameter of Carburetor Bore: 0.21" (5.5mm)

Contents

• HPI Nitro Star G3.0 Engine with Pull Start, instruction manual, R5 cold glow plug (HPIG1504), foam air cleaner assembly with four zip ties, brass collet

Requirements

• Fuel: Car blend with 20-25% nitro content

• Misc Items: Fuel tubing and track equipment

?