HPI Nitro Star T-15 Engine w/Pull Start 15101

HPI Nitro Star T-15 Engine w/Pull Start 15101

This is the Nitro Star .15 cu in (2.49cc)T-15 Pull Start Engine from HPI Racing This is the standard engine currently (1/15/04) being put in the Nitro MT 2, Rush Evo, & Nitro 3 Evo kits.

Features

• HPI Nitro Star T-15 Engine w/Pull Start 15101

• ABC construction

• 6mm Dual Needle Rotary carb

• Side exhaust

• Powder black case

• Tall powder gray heatsink head (10 fins)

• Aggressive porting

• Standard shaft

Specifications

• Carburetor: Rotary type, 6mm

• Ports: 3

• Weight: 10.2oz (290g)

• Displacement: .15 cu in (2.49cc)

• Horse Power: 1.2hp @ 29,000 RPM

• Bore: 15.0mm

• Stroke: 13.6mm

• Distance between mounting holes front to back: 0.43" (11mm)

• Distance between mounting holes side to side: 1.2" (31.5mm)

• Overall width including mounting flanges 1.6" (40mm)

• Overall height from bottom of crancase to top of head: 3.9" (100mm)

• Overall length from back of recoil to end of shaft: 3.5" (88mm)

• Diameter of head at largest point: 1.9" (49mm)

• Length of shaft: 0.75" (19mm)

• Length of threaded portion of shaft: 0.47" (12mm)

• Distance between exhaust mounting holes: 1.1" (27.2mm)

• This engine also includes mounting holes in the bottom of the crankcase. The specs for these are as follows.

• Distance between mounting holes side to side: 0.72" (18.2mm)

• Distance between mounting holes front to rear: 0.83" (21mm)

Contents

• Glow plug, brass flywheel collet, air cleaner, instructions & decals

Requirements

• Glow fuel and glow starter

Comments

• This engine will also accept the #87120 (HPIP8720) HPI Roto Start System. This engine will easily & directly fit into any nitro car or truck that accepts small block (.12-.15) engines with pull starters. per HPI