O.S. 10LA 11411 Non-ring 10H Carburetor 871 Muffler OSMG0011

11411 O.S. Engines 10LA Non-ring 10H Carburetor 871 Muffler OSMG0011

This is the Natural Finish OS Max .10 LA Aircraft Engine. Great for compact size and trainer model aircraft.

Features

• O.S. Engines 11411 10LA Non-ring 10H Carburetor 871 Muffler OSMG0011

• Remote needle valve mounted on the backplate

• Set screw in the end of the needle valve is used to mount an extension wire for in-cowl applications (wire not included).

• Extra-long bushing supported crankshaft

• Vertical fuel inlet on the needle valve at rear of engine

• Thicker webbing on high-stress areas

• Two year limited warranty

Specifications

• Length end of crankshaft to back of the needle: 3.2" (82mm)

• Length back of needle to front of drive washer: 2.4" (62mm)

• Length mounting holes on-center front to rear: 0.43" (11mm)

• Length center of Crankcase to end of Drive Washer: 1.5" (38.7mm)

• Width mounting holes on-center side to side: 1.2" (31.4mm)

• Crankcase Width: 1.4" (38.6mm) with mounting flanges

• Crankshaft Thread Size: 5.0mm x 0.8mm

• Height bottom of Crankcase to top of Cylinder Head: 2.2" (56mm)

• Height bottom of mounting tab to top or Cylinder Head: 1.7" (44.3mm)

• Displacement: 0.107 cu in (1.76cc)

• Bore: 0.529 in (13.4mm)

• Stroke: 0.488 in (12.4mm)

• RPM Range: 2500-18,000 RPM

• Output: 0.27 ps @ 17,000 RPM

• Weight: 3.95oz (112g)

Contents

• .10 O.S. Max LA Engine w/Remote Needle Valve and #10H Carburetor, A3 glow plug, #871 muffler with pressure fitting, two 2.6 x 23mm phillips head muffler mounting screws, 2.5" (63mm) section of fuel tubing and instruction manual

Requirements

• Fuel: 5% to 15% nitromethane, 18% lubricant

• Propeller: 7x4 for break in, 7x3-5, 8x4 for trainer and sport models

• Misc. Items: Starting and maintenance equipment.