O.S 35430 FS155-A P Ring 70R F6020
ITEM# 35430
Guarantee Safe Checkout
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Description
O.S 35430 FS155-A P Ring 70R F6020
This is the FSa-155-P Four Cycle Engine with Pump System from O.S. Engines.
Features
-
O.S 35430 FS155-A P Ring 70R F6020
-
Ideal for 120 size scale and sport models and aerobatic models requiring stable power and linear throttle response
-
PD-08 pump and 70R carburetor integrated with regulator ensures stable fuel delivery regardless of model attitude and fuel level
-
F-6020 three piece design muffler with center heatsink
-
New internal lubricating system eliminates breather tubing from the crankcase
-
Two year limited warranty through Hobby Services beginning at date of purchase
Specifications
-
Displacement: 1.548 cu in (25.36cc)
-
Bore: 1.323" (33.6mm)
-
Stroke: 1.126" (28.6mm)
-
Practical RPM: 2,000 - 10,000 RPM
-
Power Output: 2.6hp @ 10,000 RPM
-
Engine Weight: 28.40 oz (805g)
-
Muffler Weight: 3.35oz (95g)
-
Carburetor Settings-
-
Needle Valve: 2-1/2 - 3 turns from fully closed
-
Mixture Control Valve: Factory set, make only small adjustments if needed, after adjusting needle valve as described in manual, turn 30� to lean idle mixture or 90� counterclockwise to richen mixture then back again 45� clockwise
-
Width at Mounting Tabs: 2.6" 67mm)
-
Crankcase Width below Mounting Tabs: 1.8" (47mm)
-
Length from Drive Washer to rear of Carburetor: 5" (127.5mm)
-
Height from Mounting Tab to Pushrod Cover: 4.5" (114mm)
-
Height from bottom of Crankcase to Pushrod Cover: 5.4" (138.6mm)
-
Distance between Mounting Hole Centers Same Side: 0.98" (25mm)
-
Distance between Mounting Hole Centers Opposite Side: 2.3" (58mm)
-
Distance/front Mounting Hole Center to Drive Washer: 2.5" (64.5mm)
-
Distance/ Center of Engine to Drive Washer: 3.03" (77mm)
-
Crankshaft Size: 5/16-24
Contents
-
FSa-155-P Four Cycle Engine with PD-08 Pump System, 70R Carburetor F-6020 Muffler, Header Pipe, type F Glow Plug, Needle Valve Extension Cable, Instruction Manual
Requirements
-
Fuel: Glow fuel with 5-20% nitro content and no less than 18% lubricant content
-
Propeller: 16x8-12 or 17x8-12
-
Glow Starter
-
Field equipment