Thunder Tiger 9554 PRO .46M Inboard Ring

Thunder Tiger 9554 PRO .46M Inboard Ring

This is the Thunder Tiger Pro .46M 2-Stroke Inboard Marine Engine.

Features

• Thunder Tiger 9554 PRO .46M Inboard Ring

• Side exhaust

• CNC machined components

• ABN piston and sleeve "A"luminum piston, "B"rass cylinder liner that is "N"ickel plated

• Water cooled cylinder head, blue in color

• Hyperutectic machined Al-Si ringed piston

• Dual ball bearing-supported long style SG crankshaft

• Two needle carburetor with 9mm bore and oversized throttle lever for easy installation and operation of throttle linkage

• Three year limited warranty through Hobby Services beginning at date of purchase

Specifications

• Displacement: 0.455 cu in (7.47cc)

• Bore: 0.858" (21.8mm)

• Stroke: 0.787" (20mm)

• Practical RPM: 4,500 - 24,000

• Output: 2.46 HP @ 23,000 rpm

• Weight: 12.35oz (350g)

• Carburetor Settings-NOTE carburetor is preset from the factory and requires only small adjustments

• Needle Valve: 3 turns counterclockwise from closed

• Mixture Metering Screw: After setting needle valve, set mixture screw flush with the end of the spray bar and then turn upward about two turns

• Height from Mounting Tab Bottom/Top of Cylinder Head: 2.7" (70.1mm)

• Height from Crankcase Bottom to Top of Cylinder Head: 3.5" (88mm)

• Width at Mounting Tabs: 1.9" (50mm)

• Width of Crankcase below Mounting Tabs: 1.3" (33mm)

• Center of Mounting Holes Same Side: 0.71" (18mm)

• Center of Mounting Holes Opposite Side: 1.6" (42.9mm)

• Center of Crankcase to Front Bearing: 2.04" (51.7mm)

• Distance from Backplate to Front Bearing: 3.01" (76.4mm)

Package Contents

• Thunder Tiger Pro .46M Marine Engine with carburetor, R2 long reach glow plug, 2.5mm hex wrench, decals and instruction manual

Requirements

• Fuel: 20% lubricant and 10-40% nitro content, synthetic/castor blend lubricant recommended (do not use more than 10% nitro content for break in) Glow starter, plug wrench and shore equipment

Comments

• N/A.