Top Flite P-51D Mustang .60 Gold Edition Kit TOPA0110

Top Flite P-51D Mustang .60 Gold Edition Kit TOPA0110

Top Flite's Gold Edition P-51D combines Easy Construction with Scale Fighter Looks.

Features

• Top Flite P-51D Mustang .60 Gold Edition Kit TOPA0110

• Realistic scale details: Vacuum-Formed Canopy with Molded-In Relief

• Detail and Vacuum-Formed Exhaust Ports, Machine Gun Exits and Cowl-

• Halves molded from ABS are accurately reproduced and make it easy for the average modeler to achieve stunning results.

• The same Fine Quality Materials, Simplified Construction Methods and step-by-step Instructions as all Gold Edition kits.

• Two-piece, Molded Oil-Cooler Scoop seams on the centerline and has a die-cut internal structure for a very close to scale appearance.

• Two huge sheets of excellent, high quality decals included for "Big

• Beautiful Doll" scheme (but does NOT include the checkerboard cowl decal).

• Fuselage has a very accurate, exact scale outline with scale tail- wheel location.

• Fully-Sheeted Fully-Symmetrical Wing w/Excellent Flight Performance.

Specifications

• Wingspan: 65" CG: 3-7/8" back from Leading Edge Break

• Wing Area: 734 sq inches (LE break is point where LE goes from

• Weight: 8-10lbs steep sweep near fuse to shallow angle)

• Length: 56.5" (throws are listed below:)

• Wing Loading: 25 to 30oz/sq ft

• Scale: 1:7

• Degrees Incidence: Engine Thrust: 1.75� down, 1.6� right

• Stabilizer: 0�

• Wing: .5�

• Control Throws- High         Low

• Elevator:         11/16"     7/16"

• Rudder:           1-1/8"     7/8"

• Ailerons:          11/16"     1/2"

• Flaps:             1-1/16"     1-11/16"

Contents

• All Balsa and Plywood to Complete the kit, Clear Canopy, ABS Cowling and Detailing parts, Wire Landing Gear, Decals, Illustrated Instruction Manual, CAD-produced Rolled Plans, Pushrods, and Hardware.

Requirements

• .60-.90 (2-stroke) or .90-1.20 (4-stroke) Engine

• 4-6 Channel Radio (5th & 6th channels for retracts and/or flaps)

• 4-7 Servos

• Engine Mount, Fuel Tank, 4" Spinner, 3�"-4" Main Wheels, 1�"

• Tailwheel, Wheel Collars, Fuel Tubing, Foam Rubber, Building and Field Equipment

• Two Rolls of Covering (plus trim colors)

Comments

• For Optional items use the following: *see below for long struts*

• Robart Pneumatic Retracts ROBQ0005

• Air Control Kit for Robart Retracts ROBQ2302

• Robart Hinge Points for the flaps ROBQ2509

• 100 psi hand pump and gauge ROBQ2363

• Robart Robostruts for landing gear, use ROBQ1705 and ROBQ1706.

• See Accessories Needed for additional items.

• See below for notes on cockpit kit.

• Cockpit Note: Unfortunately the tooling and design costs to make the engineering changes to the fuselage are prohibitive for the adaptation of a cockpit kit.

• As such, there is no cockpit/interior kit available for this model at this time. Per RTJ-PM,1999 AMC

• Though a .90 size engine will fit into this plane there is no in-cowl muffler that will work with a .90.

• Decal sheet P516D01 sold only through GP Manufacturing includes:

• Two 15" x 3�" Black & Red WZ1

• 9" x 2" Black & Red Big Beautiful Doll

• 2�" x 7/8" Col JD Landers

• 1�" x �" Black & White crew listing

• 4-5/8" x 2-1/8" instrument panel

• Five 3/8" x �" Red & White "Rising Sun" kills

• 30 3/8" x �" Red, White & Black German kills

• Two 3�" x 7/8" Black 472218

• Two 7/8" White & Black fuel inlets

• 2�" x 5/8" Black air intake

• 1" Red & White circle

• 1/8" Black block letters:

• Caution! Replace Cover, Ammo Can Access, Gun Access (2), Aileron

• Servo Access, Aux. Equip. Access, Lockout Valve, Tie Down,

• Control Access, No Step (4), No Push (4).

• 1/16" Black block letters:

• No Push (4), No Step (4).

• Decal sheet P516D02 sold only through GP Manufacturing includes:

• Two 9-1/8" x 4-3/8" Blue & White stars and bars

• Two 12-1/8" x 6" Blue & White stars and bars
  ?