Phoenix Models Sonic High Wing ARF .25-.32 PMMA0125

Phoenix Models Sonic High Wing ARF .25-.32 PMMA0125

This is the radio controlled, glow powered, Almost-Ready-to-Fly Sonic High Wing sport trainer airplane kit from Phoenix Aircraft Models. For beginning modeler/fliers.

Features

• Phoenix Models Sonic High Wing ARF .25-.32 PMMA0125

• Construction: Built-up balsa and plywood

• Covering: Pre-applied PVC type heat shrink film, color scheme is mostly White on the fuselage and wings with Red, Dark Blue and Green accents

• Wings: Two-piece wood, must be joined before installation

• Radio Compartment: Plywood reinforced, easily accessible under wing

• Canopy: Silver painted section on fuselage to simulate canopy area, no canopy or pilot detail

• Landing gear: Pre-bent 3/16" (4mm) wire with 2" (51mm) foam rubber main and nose gear wheels

• Single aileron servo: Yes, standard size and torque required

• Hardware: Hinges, wing bolts and all other required fasteners included

• Motor Mount: Nylon, pre-mounted in fuselage

Specifications

• Wingspan: 52.3" (133cm)

• Length: 40.9" (104cm)

• Airfoil: Flat bottom, high wing

• Specs such as Wing Area and Wing Loading are not provided by the manufacturer

• Center of Gravity: 2.75" (70mm) Back from the wing's leading edge at the fuselage sides.

• Control Throws-
  Ailerons: Up & Down 0.20" (5mm)
  Elevator: Up & Down 0.31" (8mm)
  Rudder: Right & Left 0.51" (13mm)
  ?

Contents

• Prebuilt and pre-covered wings fuselage and tail section tricycle landing gear with 2" (51mm) wheels, nylon engine mount,  pre-bent pushrods, hardware package, fuel tank, hinges, all hardware and fasteners and photo-illustrated instructions

Requirements

• Engine: .25-.32 cu in (4.1-5.2cc) 2-stroke engine

• Muffler: Standard type included with engine

• Radio: Four channel

• Servos: Four, 42 oz/in torque minimum (1-aileron, 1-elevator, 1-rudder, 1-throttle)

• Misc. Items: 2" (51mm) spinner, 1/4" foam rubber padding, 3' medium fuel tubing, fuel filter, propeller, building and field equipment

Comments

• If a replacement fuel tank is needed, order the Sullivan 10oz flex
  tank (SULQ1728), or the DuBro 10oz tank (DUBQ0210).
  Some minor trimming and modifications may be required.
  
  
  
  
  
  
  ?

?